redline

How To Deal With Faulty Thermostats?

As soon as the thermostat reaches the required temperature, it should alert the air conditioner to turn off. A broken thermostat could be the source of your HVAC system’s continuous running. Make a comparison between the actual room temperature and the set point. If you feel that something isn’t right, have a reputable HVAC professional like AC repair in Lawrenceville GA evaluate the thermostat to see if it needs to be changed.

The Thermostat is Not Getting The Required Temperature

You have a thermostat problem if you find that your home is too hot or cold. Here are some of the most common reasons for AC replacement:

  • The thermostat requires immediate recalibration.
  • There is a snag in the wire.
  • The thermostat is dirty, damaged, or not at the correct temperature.
  • Your air conditioner isn’t the correct size for your home.
  • The thermostat isn’t in the best place.
  • Dirty or leaky ducts cause airflow issues.

What Should I Do?

  • Check The Thermostat

Like any other device, your thermostat may suffer technical difficulties from time to time. If the program it utilizes fails, it will not be able to assess the temperatures or provide accurate data accurately. Purchase an AC-specific thermometer, set it next to the thermostat, and compare the two readings. Then, using the thermometer readings and the user instructions for the thermostat, re-calibrate it.

  • Rewire The Thermostat

If you recently purchased a new thermostat and it has been acting up since installation, the issue could be with the wiring. Reattach all cables to the proper terminals according to your instructions. Corrosion and lint can also accumulate on the wiring, preventing the current flow. If you aren’t comfortable touching wires, an HVAC professional such as AC repair Lawrenceville GA can evaluate and repair your thermostat problem.

  • Clean The Thermostat

If the room temperature does not match the thermostat setting, the issue could be a buildup of dirt in the thermostat’s inside parts. A layer of dirt around the inner components may generate too much heat, causing the thermostat to read incorrectly. Remove the faceplate off the thermostat and gently wash away the debris with a clean, soft brush.

  • The Device’s Size

If you have a large house, your system may struggle to heat or cool everything. This problem usually occurs after adding on to a home or converting a space that wasn’t previously climate-controlled. You can either replace your system or add a ductless system to supplement your heating and cooling if this happens to you.

  • Ducts Are Obstructing Airflow

The air ducts in your home are distributing air throughout your home. When these are broken, have leaks, or aren’t working correctly, the thermostat may not achieve the desired temperature.

This problem can also be caused by a clogged air filter, which you should replace every few months. If you’ve changed your filters but still have issues with your system, look at your ductwork. Make sure your ducts are professionally inspected to avoid airflow difficulties.

Our mission is to educate Lawrenceville consumers about AC services. Send an email to AirMaster Heating and Air Inc. for additional information about thermostats and other HVAC subjects. If you have any questions, please phone us at the number shown on our website or fill out the form below, and one of our specialists will contact us you as soon as possible.